(949) 407-8904 Mon - Fri 08:00 - 17:00 23661 Birtcher Dr., Lake Forest, California, USA
(949) 407-8904 Mon - Fri 08:00 - 17:00 23661 Birtcher Dr., Lake Forest, California, USA
Get A Quote

Blogs

Stanford Advanced Materials (SAM) Corporation is a global supplier of various sputtering targets such as metals, alloys, oxides, ceramic materials. We update every week about news and knowledge of sputtering targets and evaporation materials. Here are the blogs we published previously.

LCD TV
June 19, 2018, ,

What Are The ITO Target Applications?

As we all know, the technological development trend of the target material is closely related to the development trend of the film technology in the downstream application industry. With the technology improvement of the film products or components of the application industry, the target technology should also be changed. For example, Ic manufacturers, which have...
Continue Reading
chip make
June 14, 2018,

How Is The Chip Made?

In modern life, people can not get away from sputtering targets at all times. Smartphones, credit cards, cameras, two generation ID cards… They all have a chip. The ultra-thin metal wire, which is nearly 10000 meters in length, is made of the sputtering target. High purity sputtering target is a key material in semiconductor chip...
Continue Reading
plate display
June 11, 2018,

What Are Sputtering Targets Used For?

High purity sputtering target, includes aluminum target, titanium target, tantalum target, tungsten titanium target, and so on. The sputtering target is mainly related to the four fields of plate display, semiconductor, storage and solar cell. 1, aluminum target High purity aluminum and its alloys are one of the most widely used conductive film materials. In...
Continue Reading
3D PRINTING
June 7, 2018,

How to Use 3D Printing Stainless Steel Targets

3D printing is increasingly used in the manufacture of various end-use products, but it can also help researchers achieve the ultimate goal. One good example is the recent project, the ORNL in Tennessee, operated by the DOE, and has been responsible for many 3D printing innovations to help them by providing research and development work....
Continue Reading
Sputtering Target-Potential Material King
June 5, 2018, ,

Sputtering Target-Potential Material King

In every era, some materials have followed the mainstream trend to become the best in the industry. In the past two years, the basic metal took off from the real estate. The new energy vehicles led the lithium, cobalt and other small metals. In the present situation, the development of the chip industry as the...
Continue Reading
April 6, 2018

Recommended Fill Rate For Evaporation Material

A wonderful serenity has taken possession of my entire soul, like these sweet mornings of spring which I enjoy with my whole heart. I am alone, and feel the charm of existence in this spot, which was created for the bliss of souls like mine. I am so happy, my dear friend, so absorbed in...
Continue Reading
ZBN
June 6, 2016

ZSBN Grade Boron Nitride- Solutions for Specialty Powder Metal Atomization

Specialty Powder Metals are made to a specific particle size distribution in small batches for specific alloys, such as common alloys of Nickel, Copper and Aluminum. Zirconia nozzles are commonly used for powder metal atomization. These are made by pressing and sintering large or coarse particles of Zirconia, lacking both tight tolerances and clean edges....
Continue Reading
1 … 28 29 30